run two G400P in one PC w/ recent debian

I have sent you email twice about this issue, why not contact me and prepare remote access?

checked inbox & spam - no email.
what was the "From:" ?

Using multiple G400P / G400E cards in a server running Debian worked fine for me. You can even mix G400P and G400E cards in the same server. It should Just Work (TM).

The most probable explanation is a simple error in /etc/asterisk./chan_extra.conf. Can you post the contents of this file here?

Sure:(althoug: i post error in kernel level, not the userland...)
# cat /etc/asterisk/extra-channels.conf
; Extra Channels Configurations (chan_extra.conf)
;
; This is not intended to be a complete chan_extra.conf. Rather, it is intended
; to be #include-d by /etc/chan_extra.conf that will include the global settings
;

; Span 1: opvxg4xx/0/1 "OpenVox G400P PCI Card 0" (MASTER) AMI/CCS
group=0,11
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 1
context = default

; Span 2: opvxg4xx/0/2 "OpenVox G400P PCI Card 0"
group=0,12
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 3
context = default

;; Span 3: opvxg4xx/0/3 "OpenVox G400P PCI Card 0"
group=0,13
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 5
context = default

; Span 4: opvxg4xx/0/4 "OpenVox G400P PCI Card 0"
group=0,14
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 7
context = default

; Span 5: opvxg4xx/1/1 "OpenVox G400P PCI Card 1"
group=0,15
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 9
context = default

; Span 6: opvxg4xx/1/2 "OpenVox G400P PCI Card 1"
group=0,16
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=off
tty=on
;pin = 1234
channel => 11
context = default

Mine looks like this:

[trunkgroups]
[channels]
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1
usecallerid=yes
callerid=+447xxxxxxxxx
cidstart=polarity
cidsignalling=dtmf

; Span 1: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" (MASTER) AMI/CCS
;group=0,11
group=1
context=from-gsm
signalling=gsm
debugat=on
tty=off
;pin=1234
channel => 1
callerid="Channel1"
echocancel=yes

..... with each span having a similar stanza, the channel number increasing by 2 each time.

Try commenting the original "group=0,x" and replace with "group=1". Do you have anything like the top section in your file?

Hi,

I received your remote access info from This email address is being protected from spambots. You need JavaScript enabled to view it. and checked the system, chan_extra is already rebuilt and configured by me and system was ready for test. Did u get my email about this? Any more questions? I still does not get your reply.